.png){kind=logo}
.png)
.webp)
Ion Exchange Resin
Selective Contaminant Removal for Complicated Water
Ion exchange resin available by the pallet, truckload, or container. Sort by application or contaminant, and get one of our engineers to validate your resin at no cost before you allocate budget.
Lower your supply risk
Lower your supply risk
Optimize process productivity
Optimize process productivity
Extend resin regeneration lifecycle
Extend resin regeneration lifecycle
Make your process safer
Make your process safer
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Media Category : Ion Exchange Resin
x
Field
:
ActiveFilter
Showing 0 of 0 results
Ion Exchange Resin
ResinTech WBG30-B is a gel epoxy polyamine weak base anion resin in the free base form. It has a higher capacity than most other anion exchange resins and has substantial strong base functionality.
Application:
WBG30B
Weak Base Anion
Free Base (FB)
Epoxy Polyamine Gel
Free Mineral Acidity
ResinTech SX-A40-OH is a type 1 macroporous strong base anion resin intended for use in the sugar industry, specifically sucrose acid neutralization. It is supplied in the hydroxide form. It has higher crosslinking than gel anion resins, which provides greater physical, thermal, and oxidation strength.
Application:
SXA40OH
Hydroxide (OH⁻)
Styrenic
ResinTech SX-A70-FB is a styrenic macroporous weak base anion resin intended for use in the sugar industry, specifically the demineralization of invert sugar. It is supplied in the free base form. The ResinTech SX-A70-FB exhibits high acid neutralization capacity and fast kinetics.
Application:
SXA70FB
Free Base (FB)
Styrenic Macroporous
ResinTech SX-C70-H is a weak acid cation resin supplied in the hydrogen form. It is intended for use in the sugar industry for sucrose decationization. SX-C70-H has a hyper-reticulated polymer structure and extensive macroporous area that allows efficient and fast exchange kinetics. This avoids the formation of Hydroxymethylfurfural (HMF).
Application:
SXC70H
Hydrogen (H⁺)
Acrylic
ResinTech MBD-15-LTOC is a mixture of a dark-colored hydrogen form cation resin and a hydroxide form type 1 strong base anion resin. The resin ratio is 1:1 on an equivalent basis. The LTOC grade means it has been functionally tested to produce 18 megohm resistivity and under 10 ppb of TOC.
Application:
MBD15LTOC
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic Gel
Dissolved Solids
ResinTech MBD-15-SC is a mixture of a dark-colored hydrogen form cation resin and a hydroxide form type 1 strong base anion resin. The resin ratio is 1:1 on an equivalent basis. The SC grade means it has been functionally tested to produce 18 megohm resistivity and under 50 ppb of TOC.
Application:
MBD15SC
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic Gel
ResinTech MBD-15-ULTRA is a mixture of a dark-colored hydrogen form cation resin and a hydroxide form type 1 strong base anion resin. The resin ratio is 1:1 on an equivalent basis. The ULTRA grade means it has been functionally tested to produce 18 megohm resistivity and under 2 ppb of TOC.
Application:
MBD15ULTRA
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic Gel
ResinTech MB-SP-50 is a 50:50 volumetric mixture of CN8-H (US made black-colored hydrogen form strong acid cation resin) and SBG1P-OH (hydroxide form type 1 porous strong base anion resin). MB-SP-50 performs best on high alkalinity waters.
Application:
MBSP50
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic
ResinTech MB-SP-60 is a 40:60 volumetric mixture of CN8-H (US made black-colored hydrogen form strong acid cation resin) and SBG1P-OH (hydroxide form type 1 porous strong base anion resin). MB-SP-60 is designed for applications where a pH-balanced mixed bed is desired to maximize. MB-SP-60 is intended for general purpose deionizing applications, such as spot-free rinsing.
Application:
MBSP60
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic
ResinTech MBD-20 is a 4:5 volumetric mixture of CG8-H-BL (a dark-colored hydrogen form cation resin) and SBG2-OH (a hydroxide form type 2 strong base anion resin). The volume ratio is close to 1:1 on an equivalent basis and the component anion resin is chosen for its high operating capacity and efficient regeneration.
Application:
MBD20
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic Gel
ResinTech MBD-25-MP is a 2:5 ratio of SACMP-H (a tan-colored hydrogen form macroporous cation resin) and SBMP1-OH (a hydroxide form type 1 macroporous strong base anion resin). The highly crosslinked components provide the highest possible thermal, physical, and chemical stability.
Application:
MBD25MP
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic Macroporous
ResinTech MBD-30 is a 1:1 volumetric mixture of CG8-H (an amber-colored hydrogen form cation resin) and SBG1P-OH-ID (a dyed hydroxide form type 1 porous strong base anion resin). The anion component is infused with a permanent pH indicator dye that changes color from blue to amber as the resin exhausts.
Application:
MBD30
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic Gel
ResinTech MBD-NANO is a 2:3 volumetric mixture of a dark-colored hydrogen form cation resin and a hydroxide form type 1 strong base anion resin. The NANO grade means it has been functionally tested to produce 18 megohm resistivity and under 2 ppb of TOC.
Application:
MBDNANO
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Styrenic Gel
ResinTech MBD-ULTRA is a 2:3 volumetric mixture of CG8-H-BL (a dark-colored hydrogen form cation resin) and SBG1-OH (a hydroxide form type 1 strong base anion resin). The ULTRA grade means it has been functionally tested to produce 18 MΩ resistivity and under 2 ppb of TOC.
Application:
MBDULTRA
Mixed Bed
Hydrogen & Hydroxide (H⁺ / OH⁻)
Gel
Mixture of dark colored hydrogen form cation resin and hydroxide form type 1 strong base anion resin. Intended for mixed bed deionization applications needing high resistivity and high throughput capacity. Provides visual confirmation of separation during regeneration.
Application:
MBD15
Mixed Bed
Hydrogen & Hydroxide (H / OH)
Styrenic Gel
Dissolved Solids
ResinTech ASM-10-HP is a chloride form arsenic selective hybrid anion exchange resin. ASM-10-HP has hydrated iron oxide monoatomically dispersed throughout the polymer giving the product hybrid properties, and exceptional capacity for certain anions.
Application:
ASM10HP
Selective Exchanger
Chloride (Cl⁻)
Styrenic Gel
Arsenic
Silica
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
.png){kind=logo}
.webp)
.webp)
.webp)
.webp)
.webp)
©2026 ResinTech, Inc.
