Radial Flow Carbon

Aries radial flow cartridges are designed to effectively reduce chlorine and improve taste and odor for low pressure, point-of-entry and other high flow residential and commercial applications. Unlike axial flow cartridges that generate extreme levels […]

See Details

Have a question about this product?

Talk to a ResinTech Specialist.

Aries radial flow cartridges are designed to effectively reduce chlorine and improve taste and odor for low pressure, point-of-entry and other high flow residential and commercial applications. Unlike axial flow cartridges that generate extreme levels of head pressure causing system failures, the radial flow will generate lower pressure drop under high flow conditions. Radial flow cartridges allow water to flow from outside into core and are designed with a porous, polypropylene 90 micron outer shell and a 25 micron inner spiral wound core. They are filled with a high-capacity powdered activated carbon (GAC) which has been pH stabilized with and acid wash rinse. The end caps of the Aries cartridge incorporate a special scalloped design to insure optimum flow distribution. All components are made of FDA approved materials for drinking water applications. Sized to fit standard slimline and big blue housings.

Highlights
  • High Flow POE

  • Fits Standard Residential & Industrial Size Housing

  • Oversized Cartridge for Maximum Media Fill

  • Lot numbered for component traceability

  • Made in the USA

Recommended Uses
  • Residential Drinking Water

  • Point-of-Entry (POE)

  • RO Pre-Treatment

  • Commercial

Applications
  • Taste & Odor Correction

  • Chlorine Reduction

  • Organics Reduction

Product Specifications

SKU RC-10-1052-BB
Cartridge Type Drop-In
Media Within Powdered GAC
Max. Pressure 125 psi (862 kPa)
Dimensions 4.5 x 10 in. (9.9 x 22 cm)
Case Quantity 8
Nominal Rating 25μ
Max. Temperature 100 ℉ (37.8 ℃)
Service Flow 1 gpm (3.8 lpm)
Maximum Flow 3 gpm (11.4 lpm)
Capacity 15000 gpm (57000 lpm)
End Cap Composition Polypropylene
Gasket Composition Thermoplastic Elastomer
Pad Composition Polyester
Body Composition Polypropylene
Competitive Equivalents 155141, RFC10BB
Housing Compatability 150237, 150469, 150239

SKU RC-20-1052-BB
Cartridge Type Drop-In
Media Within Powdered GAC
Max. Pressure 125 psi (862 kPa)
Dimensions 4.5 x 20 in. (9.9 x 44 cm)
Case Quantity 4
Nominal Rating 25μ
Max. Temperature 100 ℉ (37.8 ℃)
Service Flow 2 gpm (7.6 lpm)
Maximum Flow 5 gpm (18.9 lpm)
Capacity 30000 gpm (113500 lpm)
End Cap Composition Polypropylene
Gasket Composition Thermoplastic Elastomer
Pad Composition Polyester
Body Composition Polypropylene
Competitive Equivalents 155247, RFC20BB
Housing Compatability 150233, 150235, 150467, 160166

Related Product

Get expert advice

Need a little help deciding what to do next?
Reach out to us using the link below.