Fluoride can occur in drinking water naturally as a result of the geological composition of soils and bedrock. Additional fluoride enters drinking water in discharge from fertilizer or aluminum factories, fluoridated dental products, as well […]
See DetailsGold Seal certification may vary by size. Be sure to check the product specifications for the size you require.
Fluoride can occur in drinking water naturally as a result of the geological composition of soils and bedrock. Additional fluoride enters drinking water in discharge from fertilizer or aluminum factories, fluoridated dental products, as well as the voluntary addition of fluoride to drinking water. The EPA has set the level of protection for fluoride at 4.0 mg/L or 4.0 ppm, to prevent potential health risk.
Aries fluoride reduction cartridges utilize the advanced media technology of ResinTech® SIR-900 media, a synthetic aluminum oxide that remove fluoride by a chemical reaction with the media. ResinTech® SIR-900 has minimal shrinkage /swelling and low-pressure loss, and can be used over a wide pH range. Sized to fit standard slimline and big blue housings.
High Capacity Fluoride Removal
Resintech® SIR-900
Fits Standard Residential & Industrial Size Housing
Oversized Cartridge for Maximum Media Fill
Lot numbered for component traceability
Made in the USA
Residential Drinking Water
Commercial
Point-of-Entry (POE)
Private Wells
Fluoride Reduction
SKU | AF-10-3690 |
Cartridge Type | Drop-In |
Media Within | SIR-900 |
Dimensions | 2.5 x 10 in. (5.5 x 22 cm) |
Case Quantity | 12 |
Awards + Certifications | PROP 65 Compliant, WQA Gold Seal Certified |
Pressure Drop (𝛥P) | <2 psi (<15 kPa) |
Nominal Rating | 25μ |
Max. Pressure | 125 psi (862 kPa) |
Max. Temperature | 100 ℉ (37.8 ℃) |
Maximum Flow | 0.1 gpm (0.4 lpm) |
Capacity | 500 gal (1900 L) |
End Cap Composition | Polypropylene |
Gasket Composition | Thermoplastic Elastomer |
Pad Composition | Polyester |
Body Composition | Polypropylene |
Housing Compatability | 158005, 150067, 150150, 150068, 158006 |
SKU | AF-20-3690 |
Cartridge Type | Drop-In |
Media Within | SIR-900 |
Dimensions | 2.5 x 20 in. (5.5 x 44 cm) |
Case Quantity | 9 |
Awards + Certifications | PROP 65 Compliant, WQA Gold Seal Certified |
Pressure Drop (𝛥P) | <2 psi (<15 kPa) |
Nominal Rating | 25μ |
Max. Pressure | 125 psi (862 kPa) |
Max. Temperature | 100 ℉ (37.8 ℃) |
Maximum Flow | 0.2 gpm (0.8 lpm) |
Capacity | 1000 gal (3800 L) |
End Cap Composition | Acrylonitrile Butadiene Styrene |
Gasket Composition | Thermoplastic Elastomer |
Pad Composition | Polyester |
Body Composition | Acrylonitrile Butadiene Styrene |
Housing Compatability | 158007, 158205, 158204, 150069, 150156 |
SKU | AF-10-3690-BB |
Cartridge Type | Drop-In |
Media Within | SIR-900 |
Dimensions | 4.5 x 10 in. (9.9 x 22 cm) |
Case Quantity | 8 |
Awards + Certifications | PROP 65 Compliant, WQA Gold Seal Certified |
Pressure Drop (𝛥P) | <2 psi (<15 kPa) |
Nominal Rating | 25μ |
Max. Pressure | 125 psi (862 kPa) |
Max. Temperature | 100 ℉ (37.8 ℃) |
Maximum Flow | 0.2 gpm (0.8 lpm) |
Capacity | 1250 gal (4700 L) |
End Cap Composition | Acrylonitrile Butadiene Styrene |
Gasket Composition | Thermoplastic Elastomer |
Pad Composition | Polyester |
Body Composition | Acrylonitrile Butadiene Styrene |
Housing Compatability | 150237, 150469, 150239 |
SKU | AF-20-3690-BB |
Cartridge Type | Drop-In |
Media Within | SIR-900 |
Dimensions | 4.5 x 20 in. (9.9 x 44 cm) |
Case Quantity | 4 |
Awards + Certifications | PROP 65 Compliant, WQA Gold Seal Certified |
Pressure Drop (𝛥P) | <2 psi (<15 kPa) |
Nominal Rating | 25μ |
Max. Pressure | 125 psi (862 kPa) |
Max. Temperature | 100 ℉ (37.8 ℃) |
Maximum Flow | 0.2 gpm (0.8 lpm) |
Capacity | 2500 gal (9500 L) |
End Cap Composition | Acrylonitrile Butadiene Styrene |
Gasket Composition | Thermoplastic Elastomer |
Pad Composition | Polyester |
Body Composition | Acrylonitrile Butadiene Styrene |
Housing Compatability | 150233, 150235, 150467, 160166 |